Oase PondJet Eco Notice D'emploi page 32

Cleaning the multifunctional nozzle
How to proceed:
1. Remove three screws.
2. Remove the multifunctional nozzle.
– An O-ring is seated in a groove on the multifunctional nozzle.
3. Clean the multifunctional nozzle together with the O-ring using clean water.
– Use a soft brush as an aid.
– Ensure that the O-ring fits cleanly into the groove on the multifunctional nozzle.
4. Reassemble the unit in the reverse order.
Storage/winter protection
The unit is frost resistant to minus 20 °C. Should you store the unit outside of the pond, clean it
thoroughly with a soft brush and water, check it for damage, then store immersed in water or
filled with water. Do not immerse the power plug in water!
32
PJT0036