Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
CAUTION:
and safety glasses for your protection. Although we make every effort to make the assembly
process as problem free and safe as possible, it is characteristic of fabricated steel parts that
the edges and corners may be sharp and can cause cuts if handled incorrectly during assembly.
GETTING STARTED
1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any compo-
nents packed inside. Use the parts list to ensure all necessary parts are included.
2. Do not destroy packaging until grill has been fully assembled and operates to your satisfaction.
3. Assemble BBQ where it is to be used, lay down cardboard or a towel to protect parts from being
lost or damaged while assembling.
4. Most stainless steel parts are supplied with a protective plastic coating that must be removed
prior to using grill.
5. Follow all instructions in the order that they are laid out in this manual.
6. Two people are required to lift the grill head onto the assembled cart.
TOOLS REQUIRED FOR ASSEMBLY
3/8 (10mm)
WRENCH,
RATCHET OR
DRIVER
If you have any questions about assembly or grill operation, or if there
are damaged or missing parts please call our customer care department
at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time).
12
During unpacking and assembly it is recommended that you wear work gloves
7/16
WRENCH,
RATCHET OR
DRIVER
(tools not included)
FLAT AND PHILIPS
SCREWDRIVERS
HAMMER
Publicité
Table des Matières
