How To Use Internal Thermostat - Shizuoka Seiki Co. VAL6 EPX Manuel D'utilisation

Chauffage infrarouge au fioul

Table des Matières

Les langues disponibles

3-3. How to use Internal thermostat

By adjustment of internal thermostat knob, preset temperature can be varied

Once the ambient temperature reaches the

preset temperature, the heater will extin-

guish the ﬂ ame and start cooling operation

of automatic stop sequence.

When the ambient temperature goes below

the preset temperature, the heater restarts.

This sequence is repeated as long as the

operating switch remains on.

• The internal thermostat of this heater should be used as a guide. In case that a precise temperature is required as preset

temperature, please use the external thermostat.

In order for continuous operation, set an

internal thermostat knob on "Cont." posi-

tion.

• When the ambient temperature reaches about 40℃/104°F , the heater starts automatic stop sequence even though the

Internal thermostat knob is on "Cont." position.

• When the operation lamp lights but the heater doesn't work, the heater is in the waiting state which is controlled by the

thermostat.

■ Preset temperature of Internal thermostat

■ Location of temperature sensor for Internal thermostat

The temperature sensor for Internal thermo-

stat is located in lower right in the burner.

External thermostat connector

CAUTION

The preset temperature of the internal ther-

mostat may have margin depending on the

ambient environment of the heater.

temperature sensor for Internal thermostat

Intermal

thermostat knob

Table des Matières