Maintenance Your Camera; Maximizing Battery Life; Battery Storage And Handling; Remote - AKASO V50 Pro Mode D'emploi

MAINTENANCE YOUR CAMERA

Follow these guidelines to get the best performance from your camera:
1. For best audio performance, shake the camera or blow on the mic to remove
debris from the microphone holes.
2. To clean the lens, wipe it with a soft, lint-free cloth. Do not insert foreign objects
around the lens.
3. Don't touch the lens with fingers.
4. Keep the camera away from drops and bumps, which may cause damage to the
parts inside.
5. Keep the camera away from high temperature and strong sunshine to avoid
being damaged.

MAXIMIZING BATTERY LIFE

If the battery reaches 0% while recording, the camera saves the file and powers off.
To maximize battery life, follow these guidelines when possible:
• Turn off Wireless Connections
• Capture video at lower frame rates and resolutions
• Use Screen Saver setting.

BATTERY STORAGE AND HANDLING

The camera contains sensitive components, including the battery. Avoid exposing
your camera to very cold or very hot temperatures. Low or high temperature
conditions may temporarily shorten the battery life or cause the camera to
temporarily stop working properly. Avoid dramatic changes in temperature or
humidity when using the camera, as condensation may form on or within the
camera.
Do not dry the camera or battery with an external heat source such as a microwave
oven or hair dryer. Damage to the camera or battery caused by contact with liquid
inside the camera is not covered under the warranty.
18
Do not store your battery with metal objects, such as coins, keys or necklaces. If the
battery terminals come in contact with metal objects, this may cause a fire.
Do not make any unauthorized alterations to the camera. Doing so may compromise
safety, regulatory compliance, performance, and may void the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate or paint the camera or battery. Do not insert foreign objects
into the battery opening on the camera. Do not use the camera or the battery if it
has been damaged - for example, if cracked, punctured or harmed by water.
Disassembling or puncturing the battery can cause an explosion or fire.

REMOTE

How to Connect the Remote to Camera?
1. Press Power/Mode Button to turn on the camera.
2. Enter Setup → General, turn on the RF.
3. Turn on the remote.
The operation method of the two versions of remote controls will be slightly
different, please operate as illustrated below:
1
Splashproof only, not waterproof
Power Button
Press the Power Button for 3s to turn on/off the remote.
Power Button
Video Button
Photo Button
19