Getting Started - AKASO V50 Pro Mode D'emploi

12
1. Power / Mode Button
2. Shutter / Select Button
3. MIC
4. Wifi Indicator
5. Micro HDMI Port
6. MicroSD Slot
7. Mini USB Port
Note: Camera does not record sound when it is in the waterproof case.
4
13 14
8. Lens
9. Operating Indicator
10. Touch Screen
11. Speaker
12. Tripod Hole
13. Battery Door

GETTING STARTED

Welcome to your AKASO V50 Pro. To capture video and photos, you need a microSD
card (sold separately).
MICROSD CARDS
Use brand name memory cards that meet these requirements:
• microSD, microSDHC, or microSDXC
• Class 10 or UHS-III rating
• Capacity up to 64GB (FAT32)
Note:
1. Please format the microSD card first in this camera before using. To keep your
microSD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
2. FAT32 format microSD card stops recording when the storage of each file is over
4GB and starts to record again on a new file.
POWERING ON + OFF
To Power On:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is on. When information appears on the LCD display or the
camera status screen, your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera beeps while the
camera status light is off.
SWITCHING MODE
To Switch Mode:
Turn on the camera, tap Mode Shift icon or press Mode button to switch mode.
To Exit Mode:
Press Mode button to exit mode.
5