Camera Setting - AKASO EK7000 Pro Mode D'emploi

11. Time Lapse Photo: 2S / 3S / 5S / 10S / 20S / 30S / 60S
Default setting is Unlimited.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode to
capture photos of any activity, then choose the best ones later.
12. Continuous Lapse: Off / On
Default setting is off.
Turn on Continuous Lapse, this camera takes continuous lapse photo.

Camera Setting

1. Special Effect: Normal / B&W / Sepia / Negative / Warm / Cold / Red / Green / Blue
Default setting is Normal.
2. Power Frequency: 50Hz / 60Hz / Auto
Default setting is Auto.
3. Language: English / /
Dutch / Français /
Default setting is English.
4. Date & Time: 10 / 01 / 2018 00:23 MM / DD / YY
5. Sounds:
Shutter: Off / On
Beep: Off / On
Volume: off, 0, 1, 2, 3
Start-up: Off / On
Default setting is on.
You can turn on or off the shutter, boot-up, beep sounds.
6. Upside Down: Off / On
Default setting is off.
This setting determines the orientation of your video or photos to help you prevent upside
down footage.
09
/ Italiano/ Español / Português / Deutsch /
7. Screen Saver: Off / 1min. / 3min. / 5min.
Default setting is 1 minutes.
Turns off the LCD display after a period of inactivity to save battery life. To turn on the
display again, press any button on the camera.
8. Power Save: Off / 1min. / 3min. / 5min.
Default setting is 3 minutes.
Powers off your EK7000 Pro after a period of inactivity to save battery life.
9. Format: No / Yes
Default setting is No.
To keep your micro SD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
To reformat your card, enter Camera Setting, then scroll through the options to locate and
tap 'Format', then tap 'Yes'.
10. Reset: No / Yes
Default setting is No.
This option resets all settings to their default values.
11. Version:
Brand: AKASO
Model: EK7000 Pro
Version: JFKxxxxVx
You can check the model and updated time of your EK7000 Pro.
CONNECTING TO THE ISMART DV APP
The iSmart DV app lets you control your camera remotely using a smartphone or tablet.
Features include full camera control, live preview, playback and sharing of content, and
camera software updates.
1. Download iSmart DV app to your mobile device from the Apple App Store or Google
Play.
2. Turn on the camera, hold and press Down button for three seconds to turn on Wi-Fi.
3. Turn on Wi-Fi of your mobile device, connect to the Wi-Fi SSID ' A KASO_EK7000Pro'.
10