Brüel & Kjaer Vibro IN-081 Manuel D'instructions page 9

Table des Matières

Publicité

Kennlinie des Wegsensors Characteristic curve of
Sensortemperatur konstant (t = 25° C).
Versorgungsspannung -24 V.
Probematerial 42CrMo4 AISI 4140
Typische Übertragungskennlinie
(Pos. 1)
Typische Kennlinie der Empfindlichkeit
(Pos. 2)
Übertragungskennlinie
U = f (s) (Pos. 1)
Sie beschreibt die Abhängigkeit der
Abstandsspannung vom Abstand
zwischen Sensorspitze und Messspur.
©Brüel & Kjaer Vibro GmbH/27.03.2017
C102976.001/V12
displacement sensor
Sensor temperature, constant
(t = 25° C). Supply voltage -24 V.
Test material 42CrMo4 AISI 4140
Typical transmission characteristics
curve (Pos. 1)
Typical sensitivity characteristics curve
(Pos. 2)
Transmission characteristics
curve U = f (s) (Pos. 1)
This describes the relationship
between gap voltage and the distance
between the sensor tip and the
measurement surface.
Technischen Änderungen vorbehalten!
Technical specifications subject to change!
Sous réserve de modifications techniques!
DE
EN FR
Courbe en réponse de
déplacement
Température des capteurs, constante (t =
25° C).
Tension d'alimentation -24 V.
Echantillons 42CrMo4 AISI 4140
Caractéristique typique de transfert (Pos.
1)
Caractéristique typique de sensibilité
(Pos. 2)
Caractéristique de transfert
U = f (s) (Pos. 1)
Elle décrit la tension d'écart en fonction
de la distance entre la pointe du capteur
et la trace de la mesure.
Seite/Page 9 von/of/de 14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

In-083In-084In-085

Table des Matières