Stealth Cam STC-GXATW Manuel D'instructions page 18

ADVANCED SETTINGS (cont.)
Latitude: This function will allow the user to manually set the latitude coordinates for the camera.
!
o
The default coordinates will be 000.000000 N, this number can be set to 000.000000 -­‐
179.999999 N or S.
Longitude: This function will allow the user to manually set the longitude coordinates for the
!
camera.
o
The default coordinates will be 000.000000 E, this number can be set to 000.000000 -­‐
179.999999 E or W.
Factory Reset: This function will reset all of the cameras settings back to the default settings.
!
Format Card (Default – No): This function will clear all contents on the SD Card.
!
o
When this function is performed, the camera will rename the SD card to "STEALTHCAM" and
delete ALL the files located on the SD card. This is very important to do when you first put a
new SD card in the camera.
Language (Default – English): This fuction allows the user to decide which native language the
!
camera will operate in.
o
English
o
French
o
Spanish
o
German
Software Upgrade (Default – No): This option will only be visible if an SD Card contains upgrade
!
software. This would require going to our website and downloading the upgrade for this camera
and following the step-­‐by-­‐step instructions. It is always recommended to make sure you camera is
running the latest version of firmware.
o
The camera software can be upgraded via either the SD Card slot or mini-­‐USB port.
o
If the software fails to successfully upgrade, please contact Customer Support.
www.stealthcam.com
877-­‐269-­‐8490
18
Page