Jenn-Air JMW2427IL Mode D'emploi page 29

Serviceable
Component
Side
Monitor Fuse Top
MW Light Top
Transformer
Line Fuse Top
Procedure
1. Unplug microwave oven or disconnect power.
2. Remove wire leads.
3. Measure resistance.
4. Replace wire leads.
5.
Reassemble all parts and panels before operating.
6.
Plug in microwave oven or reconnect power.
1. Unplug microwave oven or disconnect power.
2. Remove wire leads.
3. Measure resistance (ohmmeter scale: Rx1).
4. Replace wire leads.
5.
Reassemble all parts and panels before operating.
6. Plug in microwave oven or reconnect power.
1. Unplug microwave oven or disconnect power.
2. Remove wire leads.
3. Measure resistance.
4. Replace wire leads.
5.
Reassemble all parts and panels before operating.
6. Plug in microwave oven or reconnect power.
Results - Resistance
Normal = Continuity
Abnormal = Infinite
Primary Winding = 40 Ω
(approximately)
Secondary Winding = 0.4 Ω
(approximately)
Normal = Continuity
Abnormal = Infinite
29
Component
Location
Not shown
R
Not shown