Technical Data; Disposal - DS Produkte DCM903 Mode D'emploi

Problem Possible cause/solution
•
The pad
compartment is
•
overfl owing.
The coffee cup •
overfl ows.
The device •
does not brew
•
any coffee
•
or the device
brews very
•
slowly.

Technical Data

Model:
Article:
Voltage supply:
Output:
Protection class:

Disposal

The packaging can be recycled. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices. You can obtain more information from
your local authorities.
Customer service / importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
All manuals and user guides at all-guides.com
Check to make sure the coffee pad is properly positioned in the
pad compartment.
Check to make sure the pad compartment is properly positioned
in the device.
The water reservoir is overfi lled. Only fi ll one cup of water for
one cup of coffee into the water reservoir.
There is no water in the water reservoir.
There is no coffee pad in the pad compartment.
The coffee pad compartment is not positioned properly in the de-
vice.
The device needs to be descaled.
DCM903
Z 05306
230 V~ 50 Hz
550 W
I
19