GoodHome Solna Mode D'emploi page 20

. .
. .
Use
. .
. .
. .
.
For example, a 1500 W heater displays its consumption duration
For the year
For the month
For the week
For yesterday
For today up to 12:45 dAY -> E:32 (1500 W for 32 % of the time elapsed since 0:00),
Setting the temperature offset
This setting compensates for any difference (offset) between the temperature displayed by the unit and
ambient temperature measured in the room. This difference varies from one room to another as it depends
on the insulation, room layout and location of the appliance.
This difference must be closed when the ambient temperature is stabilised after more than 2 hours of
heating in Comfort or Eco mode.
This setting changes neither the stability nor the accuracy of the temperature regulation.
• Press , then + to access the OFS menu.
• Press OK-boost to enter this menu.
• Press + or - to set the offset between 8°C and -8°C
• Press OK-boost to validate the offset.
• Press to exit the menu.
For example, if the appliance is set at 20°C and if the ambient thermometer displays 18°C, the offset must
be -2°C.
For example, if the appliance is set at 20°C and if the ambient thermometer displays 22°C, the offset must
be 2°C.
360d -> E:06 (1500 W for 6 % of the time),
i.e. 777.6 kW.h (= 777600 W.h = 1500 x 360 x 24 x 0.06).
30d -> E:14 (1500 W for 14 % of the time),
i.e. 151.2 kW.h (= 151200 W.h = 1500 x 30 x 24 x 0.14).
7-d -> E:21 (1500 W for 21 % of the time),
i.e. 52.9 kW.h (= 52920 W.h = 1500 x 7 x 24 x 0.21).
d-1 -> E:28 (1500 W for 28 % of the time),
i.e. 10.1 kW.h (= 10080 W.h = 1500 x 24 x 0.28).
i.e. 6.1 kW.h (6120 W.h = 1500 x 12.75 (= 12:45) x 0.32).
20