Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

. .
. .

Use

. .
. .
. .
.
Locking the buttons
Press and hold for more than 3 seconds on the
indicates that it is locked.
The
button is never locked.
Mode selection
Press the
button to display Πod, then the OK-boost button, then press + or - to select one of the
following modes:
Con (Comfort)
Pro (Programme)
EcP (Programme Ecopilote) Simplified weekly programming (refer to the Weekly programming
FilP
FrF (Frost protection)
Eco (Economy)
Press the
button to cancel the setting, or the OK-boost button to validate the mode: the mode and
temperature are displayed alternately every 3 seconds.
Setting the Comfort mode temperature
The Comfort and ECO setpoint temperatures are set separately.
The Comfort mode temperature range is between 13.5°C and 30°C and can be adjusted in increments of
0.5°C. If limited, reduce the ECO temperature, as the Comfort temperature is always higher than the ECO
temperature.
When Comfort mode (Con) is in operation, press the + or - button to increase or reduce the setpoint
temperature ; the temperature flashes.
Press the
button to cancel the setting, or the OK-boost button to validate the Comfort temperature
selected.
Constant temperature that can be set between 13.5°C and 30°C.
Weekly programming (refer to the Weekly programming section).
section).
unused
Temperature at 7.5°C, not adjustable.
Constant temperature that can be set between 13°C and 29.5°C.
button to lock or unlock the buttons. The
15
icon

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières