Error Codes - Black & Decker BPD8W Manuel D'instructions

TROUBLESHOOTING & WARRANTY
TROUBLE
The dishes are
not drying

ERROR CODES

When some malfunctions occur, the appliance will display error codes. Provide the
error code when you call for service.
CODES
E1
E3
E4
WARNING: If overflow occurs, turn off the main water supply before calling for
service. If there is water in the base pan because of an overfill or small
leak, the water should be removed before restarting the dishwasher.
POSSIBLE CAUSE
Improper loading
Too little rinse-aid
Dishes are removed too soon.
A short wash program was
selected.
The cutlery or dishes are
made with materials such
as plastic not suitable for a
dishwasher.
MEANINGS
Longer inlet time.
Not reaching required
temperature.
Overflow.
POSSIBLE REMEDY
Load the dishwasher as suggested in the
directions.
Increase the amount of rinse-aid/Refill the
rinse-aid dispenser.
Do not empty your dishwasher immediately
after washing. Open the door slightly so
that the steam can escape. Begin unloading
the dishwasher only once the dishes are
barely warm to the touch. Empty the low
basket first. This prevents water form
dropping off dishes in the upper basket.
The short wash programs do not have
significant drying times to dry dishes
completely. Chose a longer wash program.
Water drainage is more difficult with these
items. Cutlery or dishes of this type are not
suitable for washing in the dishwasher.
POSSIBLE CAUSE
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Page 29