Black & Decker BPD8W Manuel D'instructions page 23

CLEANING & CARE
WARNING: Never run the dishwasher without the filters in place. The dishwasher
must never be used without the filters. Improper replacement of the
filter may reduce the performance level of the appliance and damage
dishes and utensils.
Rotate the filter assembly
counter clockwise to unlock
it and lift out.
Remove the fine filter from the
bottom of the filter assembly.
Detach the coarse filter from
the main filter by gently squeezing
the tabs at the top and lifting it off.
Remove any food particles and
clean filters by rinsing under
running water. A soft brush can
be used if needed.
Replace the filter assembly in
reverse order as the removal.
Re-insert the entire assembly in
the dishwasher, positioning in its
seat, rotating clockwise until it
locks into the closed position as
shown.
Check the filters for clogs and debris
after each use of the dishwasher.
WARNING: Handle filters carefully when cleaning. If the filters become damaged
or dented it could effect the performance of the dishwasher.
NOTE: The entire filter assembly should be cleaned once a week.
NOTE: Images are for illustration purposes only and may differ slightly depending on
model purchased.
C
B
A
C
B
A
Page 23