Table des Matières
Publicité
• To avoid spoiling your product, do not use flambé recipes in connection
with it at any time.
• Do not use metal scourers or scouring powders to avoid damaging the
cooking surface.
• Do not remove the grease collector tray during cooking.
• If the grease collector tray gets filled during cooking, let the contents
cool before emptying it.
Advice / information
• For your safety, this appliance conforms to all applicable standards and
regulations (Low Voltage Directive, Electromagnetic Compatibility, Food
Compliant Materials, Environment, ...).
• On first use, there may be a slight odour and a little smoke.
• Do not consume foodstuff that comes into contact with the parts
marked with
• If the mobile connector plug is incorrectly positioned, the safety system
will prevent the appliance from working.
• The device will be ready for use once it is preheated.
Using
• Set the thermostat of the mobile connector plug to mini.
• Plug the portable connector into the appliance's resistor pins, pushing
the plug all the way in until it stops against the base, and then plug the
power cord into an electrical outlet.
• The red LED will light up to indicate that the appliance is on. The red
LED will stay on as long as the appliance is plugged in
• Set the thermostat of the mobile connector plug to maxi
Boost function:
• Using the Boost function: Preheat the appliance for 5-8 minutes on the
maximum setting
• Without using the Boost function: Preheat the appliance for 8-11
minutes on the maximum setting
• Thermo-Spot: when warm, the Thermo-Spot™ logo on the left of the plate
turns a uniform red
• Fix the thermostat according to the heat level you wish
logo.
Activate the Booster area by pressing the button
when you need it, for example for searing meat.
The indicator light will come on to show that the
function is active.
When the Booster function is activated, the
temperature and power are higher in the Booster area.
-
5.
-
6.
-
5.
-
3.
-
4.
-
8.
EN
24
Publicité
Table des Matières
