Pool Preparation - Kokido DELTA 100 Manuel D'utilisation

NOTE: Wheel axle should be positioned above the locking pin
Pin location

Pool Preparation

- If there are stones, roots or metal corrosion in contact with the underside of the liner,
discard them prior to using the robot. If necessary, seek assistance from a qualified
professional.
- If the liner is brittle, damaged or wrinkled, contact a qualified professional to perform
the necessary repairs or perform a liner replacement prior to using the robot.
- Remove any pool ladder, surface skimmer, and other floating objects from the pool
as they may obstruct the movement of the robot's float and, consequently, the
movement of the robot also.
- If you are using a saltwater pool, make sure all salt are dissolved before placing the
robot into the water.
For pools where the shortest length is 2 meters or above
(Factory setting)
For pools where the shortest length is 2 meters or below.
Pool size
13