VALBERG 967751 Consignes D'utilisation page 22

C C
Repair
Anomaly
The appliance does not
work.
Food is too hot.
Excessive cooling of
the appliance.
Unusual noises
There is water on the
floor.
If the malfunction continues, contact the repair centre.
Cleaning and maintenance Nettoyage et entretien
Possible cause
The appliance is switched off.
The power outlet is not
plugged in or is loose.
The fuse has blown or is
defective
The plug is defective.
The temperature is not
properly adjusted.
The door was open for an
extended period.
A large quantity of warm
food has been placed in the
appliance within the last 24
hours.
The appliance is near a heat
source.
The temperature is set too
cold.
The appliance is not level
The appliance is touching the
wall or other objects.
A component, for example
a pipe, on the back of the
appliance is touching another
part of the appliance or the
wall.
The water drainage hole is
clogged.
15 15
Solution
Press the Adjust button for
5 seconds to turn on the
appliance.
Connect the plug.
Check the fuse and replace it if
necessary.
Operating malfunctions are to
be corrected by an electrician.
Please see the Initial
temperature setting section.
Open the door only for the
necessary time.
Turn the temperature
controller temporarily to a
cooler setting.
Please see the Installation
location
Turn the temperature control
knob temporarily to a cooler
setting.
Adjust the wooden unit if it is
not level.
Move the appliance slightly.
If necessary, carefully bend
the component to leave more
space.
See the Cleaning section.
EN FR