•
Do not place the unit in the vicinity of open sources of fire, electric cookers, furnaces
or other sources of heat such as e.g., in places exposed to direct sunlight. The heat
can damage the surface of the unit, as well as have a negative effect on the cooling
power and increase the consumption of energy.
•
In order to avoid compressor errors, do not tilt the unit above 45° during its
placement or transport.
•
The unit should be placed in a manner that assures the proper circulation of air in
order to guarantee the cooling properties of the unit. A minimum space of 10 cm from
walls and other objects should be maintained.
•
Do not place the unit in locations with high air humidity or high temperatures,
because these factors can damage the unit.
•
Before the first use the unit should stand for at least 2 hours before it is connected to
the power source.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
unit directly to the wall socket; do not use any extension cords or power strips.
•
Position the device in a way so that the power plug is always accessible.
5.3 Operating
•
Prior to first use, clean the unit.
•
Wash the shelves in warm water and a mild cleaning agent prior to placing in the
refrigerated showcase .
•
Clean the interior and exterior of the unit with a moist, soft cloth. Dry thoroughly.
•
Insert the plug into a grounded single outlet.
•
Beverages and food products may be placed in the refrigerated showcase after it
has reached the desired temperature.
Setting the temperature
•
The optimal temperature has been set at the factory and is between 2°C and 6 °C.
These settings are appropriate for a working temperature in the refrigerated showcase
between
2° – 12°C.
ATTENTION!
The factory settings may not be changed by the user!
•
The temperature indicated on the display is the temperature around the thermometer.
•
If the user desires to change the factory settings, it is necessary to contact a
customer service agent.
- 26 -