Connecting A Dolby Digital Decoder; Connecting A Dts Decoder - Dynex DX-LTDVD20 Guide De L'utilisateur

Setting up your TV combo

Connecting a Dolby Digital decoder

You can connect your TV combo to an amplifier equipped with a Dolby
Digital decoder or processor to listen to DVD audio in surround sound.
3
C R / P R
COAXIAL C
2
1
Amplifier with Dolby Digial decorder
To connect to an amplifier equipped with a Dolby Digital decoder:
1 Remove the port cover on the back of your TV combo.
2 Plug a coaxial cable (2) into the Dolby Digital jack on the amplifier
(1) and into the COAXIAL OUTPUT jack (3) on the back of your
TV combo.
Y AUDIO
L
R
B / P B
INPUT

Connecting a DTS decoder

You can connect your TV combo to an amplifier equipped with a DTS
®
decoder or processor to listen to DVD audio or audio CDs in DTS sound.
3
2
1
To connect to an amplifier equipped with a DTS decoder:
1 Remove the port cover on the back of your TV combo.
2 Plug a coaxial cable (2) into the DTS jack on the amplifier (1) and
into the COAXIAL OUTPUT jack (3) on the back of your TV combo.
C P Y
R / R AUDIO
L
R
COAXIAL C B / P B
INPUT
Amplifier with DTS decoder
9