Connecting An Mpeg Audio Decoder; Connecting A Digital Audio Input - Dynex DX-LTDVD20 Guide De L'utilisateur

10

Connecting an MPEG audio decoder

You can connect your TV combo to an amplifier equipped with a MPEG
decoder or processor to listen to DVDs in MPEG2 sound.
3
C P
R / R
COAXIAL C
2
1 Amplifier with MPEG2 audio decoder
To connect to an amplifier equipped with an MPEG audio decoder:
1 Remove the port cover on the back of your TV combo.
2 Plug a coaxial cable (2) into the amplifer (1) and into the COAXIAL
OUTPUT jack (3) on the back of your TV combo.
Y AUDIO
L
R
B / P B
INPUT

Connecting a digital audio input

You can connect your TV combo to a 2-channel digital amplifier to listen
to 2-channel sound.
Note
PCM audio is limited to DVD or CD playback.
3
C R / P R
COAXIAL
2
Amplifier with digital audio input
1
To connect to an amplifier equipped with a digital audio input:
1 Remove the port cover on the back of your TV combo.
2 Plug a coaxial cable (2) into the amplifier (1) and into COAXIAL
OUTPUT jack (3) on the back of your TV combo.
Setting up your TV combo
Y AUDIO
L
R
C P
B / B
INPUT