Ec Declaration Of Conformity - Comunello Automation RAMPART 600 Instructions D'utilisation Et D'installation

INSTALLATION AND USER'S MANUAL
RAMPART 600 / 1000

EC DECLARATION OF CONFORMITY:

The undersigned Mr. Luca Comunello, representing the following manufacturer,
Fratelli COMUNELLO Spa
Via Cassola 64, 36027 Rosà (VI) – Italy
DECLARES that the equipment described below:
Description: Electromechanical operator for sectional doors
Model: RAMPART 600 - RAMPART 1000
Is in compliance with the provisions set down in the following directives:
• 2014/53/EU (RED)
and that all the rules and/or technical specifications shown below have been applied:
EN61000-6-2:2005 + AC:2005
EN61000-6-3:2007 + A1:2011
EN62233 :2008
ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.1.1
ETSI EN 301 489-1 V2.1.1
ETSI EN 301 489-3 V2.1.1 Final Draft
EN60335-1:2012+ AC:2014 + A11:2014
and the following amendments.
and he also declares that it is not allowed to commission the device until the machinery where it will be incorporated or whose it will
become a component will have been identified and will have been declared in compliance with the conditions of the 2006/42 EC Directive
and with the national legislation that transpose it.
Rosà (VI) – Italia
13-06-2017
Mr. Luca Comunello
Fratelli Comunello Legal Representative Represe s s s s s s
Fratelli Comunello S.p.A.
Company with certified Quality Management System
UNI EN ISO 9001:2015.
COMUNELLO ®Copyright 2021 - All rights reserved
18
• 2011/65/EU (RoHS Directive)
ntative