Sony SDM-HS75 Mode D'emploi page 29

Step 3: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
to a power outlet
power cord (supplied)
8
to AC IN
Step 4: Secure the cords and
replace the back cover
1
Bundle the cables and cords.
Using the supplied cord strap, bundle the cables and cords.
The illustration of the back of the monitor shown here
is that of the SDM-HS75.
The same applies for the other models.
2
Replace the back cover.
Cord
strap