Starting The Machine - Saeco Talea Giro Mode D'emploi

STARTING THE MACHINE

Make sure the power button is not pressed and the machine is turned off. Check the machine features on
the label on the bottom of the appliance.
1
Lift the cover of the coffee bean
hopper.
4
Fill the tank with fresh drinking
water up to the MAX level.
Reinsert the tank.
The machine automatically primes the circuit. If this operation is not completed, proceed manually as described
from step 7 to 12.
7
Place a container beneath the
steam spout.
2
Fill the container with coffee
beans. Close the cover placing
it correctly on the hopper.
5
Insert the plug into the socket
located in the rear panel of the
machine and insert the other
end into a socket with suitable
current.
8
Press the water button. The
indicator light turns on.
INSTALLATION
3
Remove the water tank.
We recommend installing the
"Aqua Prima" water fi lter (see
page 8).
6
Firmly push down the power
button to turn on the machine.
The machine performs a self-
test.
9
Turn the knob until the
position is reached.
7