Starting And Programmes; Programme Table - Indesit WITL 62 Mode D'emploi

Starting and Programmes

Briefly: starting a programme
1. Switch the washing machine on by pressing button
GB
All the LEDS will light up for a few seconds and
the ON-OFF/DOOR LOCK Led will begin to flash.
2. Load your laundry into the washing machine, add
the detergent and any fabric softener (see page 8)
and shut the appliance door.
3. Set the PROGRAMME knob to the programme required.

Programme table

Type of fabric and
degree of soil
Standard
Cotton: Extremely soiled whites
(sheets, tablecloths, etc.)
Cotton: Extremely soiled whites
(sheets, tablecloths, etc.)
Cotton: Heavily soiled whites and
fast colours
Cotton: Heavily soiled whites and
delicate colours
Cotton: Slightly soiled whites and deli-
cate colours (shirts, jumpers, etc.)
Synthetics: Heavily soiled fast co-
lours (baby linen, etc.)
Synthetics: Heavily soiled fast co-
lours (baby linen, etc.)
Synthetics: Delicate fast colours
(slightly soiled)
Wool
Very delicate fabrics (curtains, silk,
viscose, etc.)
Time 4 you
Cotton: Heavily soiled whites and
fast colours
Cotton: Slightly soiled whites and deli-
cate colours (shirts, jumpers, etc.)
Synthetics: Delicate colours (all types
of slightly soiled garments)
Synthetics: Delicate colours (all types
of slightly soiled garments)
Sport
Sports shoes (MAX. 2 pairs)
Fabrics for sportswear (Tracksuits,
shorts, etc.)
PARTIAL PROGRAMMES
Rinse
Spin
Drain
Notes
-For programmes 8 and 9, we advise against exceeding a wash load of 3.5 kg.
-For programme 13 we advise against exceeding a wash load of 2 kg.
-For the anti-crease function: see Easy iron, opposite page. The information contained in the table is purely indicative.
Special programme
Daily Refresh (programme 11 for Synthetics) is designed to wash lightly soiled garments in a short amount of time: it
only lasts 30 minutes and allows you to save on both time and energy. By setting this programme (11 at 30°C), you can
wash different fabrics together (except for woollen and silk items), with a maximum load of 3 kg.
We recommend the use of liquid detergent.
6
All manuals and user guides at all-guides.com
.
Detergent
Program- Tempe-
mes rature
Pre-
Wash
wash
1 90°C •
90°C
2
2 60°C
2 40°C
3 40°C
60°C
4
4 40°C
5 40°C
6 40°C
7 30°C
8 60°C
9 40°C
10 40°C
11 30°C
30°C
12
13 30°C
4. Set the wash temperature (see page 7).
5. Start he programme by pressing the START/RESET
button. To cancel it, keep the START/RESET button
pressed for at least 2 seconds.
6. When the programme is finished, the ON-OFF/
DOOR LOCK Led will flash to indicate that the
appliance door can be opened. Take out your
laundry and leave the appliance door ajar to allow
the drum to dry thoroughly. Turn the washing
machine off by pressing button
Fabric Stain remo- Cycle
softe- val option/ length
ner bleach (minutes)
• • 167
Delicate/
• • 152
Traditional
Delicate/
• • 150
Traditional
Delicate/
• • 140
Traditional
Delicate/
• • 99
Traditional
• • Delicate 80
Delicate
• • 71
• • Delicate 71
• • 50
• • 52
• • 60
• • 50
• • 40
• • 30
• • 50
• • 63
Delicate/
•
Traditional
.
Description of
wash cycle
Pre-wash, wash cycle, rinse
cycles, intermediate and final
spin cycles
Wash cycle, rinse cycles, inter-
mediate and final spin cycles
Wash cycle, rinse cycles, inter-
mediate and final spin cycles
Wash cycle, rinse cycles, inter-
mediate and final spin cycles
Wash cycle, rinse cycles, inter-
mediate and final spin cycles
Wash cycle, rinse cycles, anti-
crease or delicate spin cycle
Wash cycle, rinse cycles, anti-
crease or delicate spin cycle
Wash cycle, rinse cycles, anti-
crease or delicate spin cycle
Wash cycle, rinse cycles, ,
delicate spin cycle
Wash cycle, rinse cycles, anti-
crease or draining cycle
Wash cycle, rinse cycles, inter-
mediate and final spin cycles
Wash cycle, rinse cycles, inter-
mediate and final spin cycles
Wash cycle, rinse cycles,
delicate spin cycle
Wash cycle, rinse cycles and
delicate spin cycle
Cold wash (without deter-
gents), wash cycle, rinse
cycles, and delicate spin cycle
Wash cycle, rinse cycles, inter-
mediate and final spin cycles
Rinse cycles and spin cycle
Draining and spin cycle
Draining