Engine Oil Change / Engine Oil Check; Engine Oil Check; Storage; Disposal - Zipper Maschinen ZI-MOS4TA Manuel D'utilisation

14.1.3 Engine oil change / engine oil check

14.2 Storage

If the machine will be stored longer than 30 days:
 Let the machine cool down.
 Empty Tank completely, avoid fuel spillage.
 Remove and clean thread head and cutter blade
 Fit the blade guard
 Clean the machine and dry
 Store in a dry, out of reach of children place, well packaged (protection against cuts)

14.3 Disposal

Do not dispose the machine, machine components fuel and oil in residual waste. Contact
your local authorities for information regarding the available disposal options. When you
buy at your local dealer for a replacement unit, the latter is obliged to exchange your old.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-MOS4TA
N O T I C E
Waste oils are toxic and must not be released into the
environment! Contact your local authorities for information on proper
disposal.
INHALT / INDEX / INDICE/

Engine oil check:

Regularly prior to each operation!
Remove the oil filler cap/dipstick
Minimum: LOWER LIMIT
Maximum. UPPER LIMIT
Fill up with engine oil if the level is below
the minimum.
Engine oil change:
After 100 working hours
Drain the oil into a suitable container
Fill in new motoroil (15w40)
27