Maintenance
Installation door gasket after cleaning:
Before installation, make sure that there is no water on the door
gasket. Insert the door gasket into the groove , and press the door
gasket tightly from the top to the bottom by hand until the whole
door gasket is inserted into the groove.
Cleaning the shelves:
▶ All shelves can be taken out for cleaning.
▶ Take out all bottles.
▶ Lift each shelf a little and take it out.
▶ Clean the shelf with a soft towel.
▶ Wait until the shelves are dry before putting them back in.
WARNING:
Wait at least 7 minutes to reconnet the power after the power
has been disconnected.
12
EN