General safety instructions:
•
Do not leave packaging material lying around carelessly. Plastic/ foil/bags and polystyrene parts etc.
could become dangerous toys for children.
•
For safety reasons, keep the device out of reach of children, due to small parts which could be
swallowed.
•
Please do not insert objects through the openings into the device.
•
Use only accessories which are specified by the manufacturer.
Please do not connect incompatible parts to the device.
•
Please pay attention to the safety instructions and user manuals of the other connected devices.
•
Check the device for damages before installation. If this should be the case please do not use it.
•
Please adhere to the operational voltage limitations listed in the technical data. High voltage could
destroy the device and pose a health hazard (electric shock).
During the installation into an existing video surveillance system make sure that all devices are
disconnected from the low and supply voltage circuit.
If in doubt allow a professional electrician to mount, install and wire-up your device. Improper
electrical connection to the mains does not only represent at threat to you but also to other
persons.
Wire-up the entire system making sure that the mains and low voltage circuit remain separated
and cannot come into contact with each other in normal use or due to any malfunctioning.
Unpacking
While you are unpacking the device please handle it with utmost care.
If you notice any damage of the original packaging, please check at first the device.
If the device shows damages, please contact your local dealer.
All manuals and user guides at all-guides.com
12
English