Measure The Installation - Best WTT21I3 Serie Mode D'emploi

MEASURE THE INSTALLATION

8"
ROUND DUCT
DECORATIVE FLUE
3
4 / "
FROM WALL TO
8
CENTER LINE OF DUCT
DECORATIVE FLUE
HOOD
24" 30"
TO ABOVE
COOKING SURFACE
The minimum hood distance above cooktop MUST NOT BE LESS than 24" .
A maximum of 30" above cooktop is highly recommended for best capture of
cooking impurities.
Distances over 30" are at the installer and users discretion; providing that the
ceiling height permits.
INSTALL THE DUCTWORK
(Ducted Hoods Only)
1. Decide where the ductwork will run between the hood and the outside.
2. A straight, short duct run will allow the hood to perform most efficiently.
3. Long duct runs, elbows and transitions will reduce the performance of the
hood. Use as few of them as possible. Larger ducting may be required for best
performance with longer duct runs.
4. Install wall cap or roof cap. Connect round metal ductwork to cap and work back
towards the hood location. Use duct tape to seal the joints between ductwork
sections.
ROOF CAP
ROUND ELBOW
WALL CAP
HOOD MOUNTING
BRACKET
1
13 / "
TO CENTER
8
OF UPPER MOUNTING
HOLES
3
1 / "
TO CENTER
8
OF LOWER HOOD
CHASSIS HOLES
- 6 -