Grounding Instruction - Best WTT21I3 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

READ AND SAVE THESE INSTRUCTIONS
INTENDED FOR DOMESTIC COOKING ONLY
!
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON(S)
OBSERVE THE FOLLOWING:
1.
Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer at the address or telephone number listed
in the warranty.
2.
Before servicing or cleaning unit, switch power off at service panel and lock
service disconnecting means to prevent power from being switch on accidentally.
When the service disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
3.
Installation work and electrical wiring must be done by qualified personnel
in accordance with all applicable codes and standards, including fire-rated
construction codes and standards.
4.
Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) of fuel burning equipment to prevent backdrafting.
Follow the heating equipment manufacturer's guidelines and safety
standards such as those published by the National Fire Protection
Association (NFPA), the American Society for Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE) and the local code authorities.
5.
This product may have sharp edges. Be careful to avoid cuts and abrasions
during installation and cleaning.
6.
When cutting or drilling into wall or ceiling, do not damage electrical wiring and
other hidden utilities.
7.
Ducted fans must always be vented to the outdoors.
8.
To reduce the risk of fire, use only steel ductwork.
9.
Do not use this unit with any other solid-state speed control device.
10. Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair.
11. GROUNDING INSTRUCTION: The appliance must be grounded. In the event
of an electrical short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. The appliance is equipped with
a cord having a grounding wire with a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded. WARNING: Improper
grounding can result in a risk of electric shock. Consult a qualified electrician if
the grounding instructions are not completely understood, or if doubt exists as
to whether the appliance is properly grounded. Do not use an extension cord. If
the power supply cord is too short, have a qualified electrician install an outlet
near the appliance.
- 2 -
!

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wtt32i336sbWtt32i342sbWtt32i330sb

Table des Matières