Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. PREPARE THE INSTALLATION
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Make sure that the following items are included:
- Hood
- Accessories
• Decorative flue assembly (lower and upper flues)
• Hood mounting bracket (taped inside the hood)
• Upper flue mounting bracket (taped inside the hood)
• 2 hybrid filters
• 3¼" x 10" adapter/damper (for horizontal or vertical discharge) taped inside the decorative flue
• Bag of parts (taped inside the hood) including: 5 no. 8 x 1½" countersunk screws, 8 no. 8 x 3/4" screws,
Parts sold separately:
- Duct, elbows, wall or roof caps.
- Optional flue extension for 10-ft. ceilings model AEWCB3SB.
- Glass panel for WCB3I30SBN and WCB3I36SBN models (see service parts list on page 15).
NOTE: During installation, protect countertop and/or cooktop.
3. SELECT INSTALLATION TYPE
Refer to illustrations below to locate duct opening according to discharge type chosen (grey parts to be installed later).
H
ORIZONTAL DISCHARGE
1
5
⁄
"
8
30"
WIDTH HOOD
HK0059A
36"
WIDTH HOOD
4. REMOVE HYBRID FILTERS
Lay the back of the hood on a table. Use a piece of cardboard to avoid damaging the table or
the hood. Remove tape on filters. Remove filters by pushing them down and flipping downwards.
Set the filters aside.
!
C L
9¾"
11"
3
3
⁄
"
16
14
⁄
"
15
16
17
15
⁄
"
16
WARNING
6 no. 8 x 3/8" screws, 6 drywall anchors, 3 washers,
2 no. 8 x 1/2" , 2 foam squares. If need be, discard extra hardware.
V
ERTICAL DISCHARGE
HK0060A
5
C L
30"
14
15
⁄
"
WIDTH HOOD
16
36"
17
15
⁄
"
WIDTH HOOD
16
7/8"
3
⁄
"
3
16
9¾"
HO0250
Publicité
Chapitres
Table des Matières
