Beurer medical BC 60 Mode D'emploi page 21

your doctor. Any self-diagnosis and treatment based on the
test results may be dangerous.
It is vital to follow your doctor's instructions.
Range of blood pressure values
Grade 3: Severe hypertension
Grade 2: Moderate hypertension
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999
The bar graph in the display and the scale on the unit indicate
the range of the blood pressure which has been recorded. If
the values for systolic and diastolic pressure are in two differ-
ent WHO ranges (e.g. systolic in the high-normal range and
diastolic pressure in the normal range) the graphic WHO clas-
sification on the unit indicates the higher range (high-normal
in the example described).
All manuals and user guides at all-guides.com
Systolic (in mmHg) Diastolic (in mmHg)
>=180
160 -179
140 -159
130 -139
120 -129
<120
WHO classification:
According to WHO Guidelines/Definitions and the latest find-
ings, the test results can be classified and evaluated accord-
ing to the following chart:
Measure
>=110 Seek medical advice
100 -109 Seek medical advice
90 - 99 Have it checked regularly by doctor
85 - 89 Have it checked regularly by doctor
80 - 84 Check it yourself
<80 Check it yourself
5.4 Resting indicator measurement (using HSD
diagnostics)
The most frequent error made when measuring blood pressure
is taking the measurement when not at rest (haemodynamic
stability), which means that both the systolic and the diastolic
blood pressures are incorrect in this case. During blood pres-
sure measurement, the device automatically determines
whether the circulatory system is sufficiently at rest or not.
If there is no indication that the circulatory system is not
sufficiently at rest,
and the measurement can be recorded as a reliable resting
blood pressure value.
17
(haemodynamic stability) is displayed