Care And Cleaning; General Cleaning; Routine Cleaning - Hamilton Beach FlexBrew 49974 Mode D'emploi

Care and Cleaning

w WARNING Shock Hazard.
Do not immerse cord, plug, or coffee maker in any liquid.
Cut Hazard.
w CAUTION
Removable single-serve pack holder has a sharp needle. Piercing
needle on underside of lid also is sharp. Use caution when handling.

General Cleaning

1. Unplug and allow to cool.
2. Hand wash all removable parts in hot, soapy water. Rinse and
dry or wash in TOP RACK only of dishwasher. DO NOT use the
"SANI" setting when washing in the dishwasher. "SANI" cycle
temperatures could damage your product.
3. Wipe outside of coffee maker with a soft damp cloth.

Routine Cleaning

All coffee makers should be cleaned at least once a month (once a
week for areas with hard water).
1. Plug into outlet.
2. Pour 3/4 cup (177 ml) of plain white vinegar and 3/4 cup (177 ml)
of cold water into reservoir.
3. Place a 14-oz. (414-ml) or larger cup or travel mug underneath
to catch the water/vinegar solution. Press the BREW NOW I/
button once. After 30 seconds, press the BREW NOW I/ button
again to stop the brewing and allow the vinegar to clean. After
30 minutes, press BREW NOW I/ button and allow it to finish
the brew cycle. When brew cycle is finished, empty cup and
rinse. Run 2 to 3 cycles of cold tap water. The unit is cleaned and
ready to brew coffee.
4. Unplug.
6
Clogged Needle
1. Unplug and allow to cool.
2. Remove the gray removable needle
holder in the lid by turning the arrow
from the locked icon ( ) to the unlocked
icon ( ).
3. Bend a small paper clip. Insert the tip of
the paper clip through the hole of the
piercing needle and up into the shaft of
the piercing needle to ensure grounds
have been removed.
4. To replace the gray removable needle
holder, insert the tab between the lock
icon ( ) and unlock icon ( ) and turn to the right to lock.
2