Sony SRS-WS1 Manuel D'instructions page 13

Troubleshooting (continued)
You cannot hear
The transmitter is
the sound.
connected to an AV
(The indicator on
amplifier or a home
the transmitter
theater system with the
lights up in
digital optical cable.
yellow.)
The speaker and the
transmitter are not
paired.
The battery is low.
You cannot hear
the sound.
The signals are not
(The indicator on
being received.
the transmitter
lights up in
green.)
SRS-WS1.US.4-699-102-12(1)
Make sure that the audio output setting is
set to linear PCM (page 4), or use the
supplied audio cable (page 10).
If the power indicator on the speaker is
flashing in green, it may be because the
speaker is not paired.
See "Connecting a second speaker"
(page 11).
Power indicator
Charge the speaker (page 5).
Reset the speaker and the transmitter.
Press the power button and vibration button
on the speaker at the same time.
Press these
together
Press the reset button located on the bottom
of the transmitter with a sharp-edged pen or
the like.
US
13