SOMFY Roll Up WireFree RTS Serie Notice D'installation page 9

Adding/Deleting RTS transmitter
Find an RTS transmitter programmed
in the motor.
Press and hold the RTS programmed
transmitter (A) PROG button or the
motor PROG button until the shade
jogs: the motor is in programming
mode.
Quickly press the RTS transmitter (B)
PROG button to add or delete: the
shade jogs and the RTS transmitter
is programmed or deleted from the
motor.
End limit re-adjustement
UP LIMIT
1) Press the UP button, to move the
shade to the limit to be readjusted.
2) Press and hold the UP and DOWN
buttons simultaneously until the shade
jogs.
3) Press and hold the UP or DOWN
button to move the shade to the new
desired position.
4) To confirm the new limit press and
hold the MY button until the shade
jogs.
DOWN LIMIT
1) Press the DOWN button to move
the shade to the limit to be readjusted.
2) Press and hold the UP and DOWN
buttons simultaneously until the shade
jogs.
3) Press and hold the UP or DOWN
button to move the shade to the new
desired position.
4) To confirm the new limit press and
hold the MY button until the shade
jogs.
Copyright © 2010 Somfy SAS. All rights reserved - V0 - 09/2010
PROG.
A
1
C
3
PROG.
A
1
3
PROG.
B
2
C
4
PROG.
C
2
4
C
7