Enjoy Soothing Nature Sounds
1. From the main menu, select SETTINGS to display the
Settings menu.
2. Select BLUETOOTH and verify that Bluetooth is On.
3. From the main menu select SOUND SOOTHE.
4. Select SOUND, then choose from eight relaxing nature sounds.
5. Select VOLUME to set the desired volume.
Foot massage too soft? Remove the
softening soles from underneath your feet.
To install your softening soles, simply open
the foot/calf massage well zippers, remove
the softening soles from the bottom of the
massage wells, then close the zippers.
Softening Soles
humantouch.com
Bottom of the
massage wells
14
care and
maintenance
To keep your product working and looking its best, please follow these simple
care guidelines.
WARNING:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. When cleaning the remote control or power switch, use a dry cloth only. Never use a damp cloth to clean any
.
electrical component
CAUTION:
1. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not
fade prior to using the solution on the entire product surface.
2. Do not use benzene, thinner or any other solvents on your product.
Cleaning Code Standard for SofHyde or Cloth: W
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush
vacuum extension. If your product becomes dirty, use a water-based upholstery cleaner only. To treat stains, spot clean
with an upholstery shampoo or a mild detergent foam.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic
lubrication or servicing is required.
2. Your chair should only be serviced by a Human Touch-authorized service representative.
Use and Storage Environment:
1. Do not place the chair in direct or reflected sunlight, as ultraviolet rays will quickly fade the upholstery color and
cause SofHyde upholstery to rapidly deteriorate.
2. Operate your chair in a room temperature between 41 and 104 degrees Fahrenheit (5 to 40 degrees Celsius) with
humidity levels of 10% to 70% (non-condensing) to avoid damage.
3. To prevent damage to the upholstery, before sitting in your chair make sure there are no sharp objects in your pockets
and no metal buttons or zippers that can come in contact with the chair.
4. Do not place the chair where excessive dust and pet hair can migrate into the chair's electrical and mechanical
components; this can cause malfunction over time.
5. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled, and
that the unit be placed in an environment free of dust and moisture.
6. Store your chair in a room temperature between 5 and 122 degrees Fahrenheit (-15 to 50 degrees Celsius) with
humidity levels of 10% to 70% (non-condensing) to avoid damage; product stored in cold temperatures may require
48 hours at room temperature to function properly.
7. Do not store near open heat or flame.
15