Human Touch QUIES Mode D'emploi Et D'entretien page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

take
control
THE STATUS SCREEN DISPLAYS DURING YOUR MASSAGE, PROVIDING
A QUICK REFERENCE FOR THE FOLLOWING INFORMATION
SPEED — The percussion massage speed.
CLOUD — The Cloud Touch intensity.
WIDTH — The Tap Touch, Percussion, or Rolling
horizontal massage range.
FOOT — The underfoot roller speed.
Illustrates the areas currently being massaged.
On/Off — Press this button to power
on the remote; press again to restore
the chair to the upright position and
power off the remote.
Menu — Displays the main menu.
Use the arrow buttons to navigate the
menus; press
to select a menu option.
Legs — Press and hold to raise
or lower the footrest.
If the chair is not in use for three minutes the
controller display automatically shuts down. Press the
On/Off button to resume use. The chair resets all
settings to the default position.
humantouch.com
The amount of time remaining
in the current massage session.
Displays red to indicate heat is on.
Lights to indicate that Bluetooth is on.
Position — Use to move the massage
rollers to the desired position when
enjoying a Zone or Spot massage.
See Using Manual Massage Modes on
page 10 for more information.
Manual — Displays the Manual
massage menu.
Auto — Displays the Auto Programs
menu. When an auto program is running,
press to toggle among the auto programs.
The active program displays at the top of
the status screen.
Heat — Press to toggle the heat on
and off. When the heat is on, the heat
icon on the screen displays red.
Back — Press and hold to recline or
incline the backrest.
ZeroG
— Press to automatically position
®
the chair in ZeroG mode, raising your feet
above your heart for maximum spine relief.
8
8
Choose from nine Auto Programs
based on your current need, or configure your own massage
using the Manual massage menu. You can also control the Cloud Touch air massage focus
and intensity. For an ultra-soothing massage, turn the heat on and connect your smartphone
or tablet to the chair's speaker system.
USING THE
AUTO
PROGRAMS
1. From the main menu, select AUTO to display the Auto Programs menu.
TENSION RELIEF
- Focuses on relieving tension in the neck and shoulders.
PERFORMANCE
- Delivers an intense Cloud Touch air massage.
ENERGIZE
- Gets you up and moving for the day.
RECOVERY
– Moves from your neck and shoulders down to glutes and thighs.
STRETCH
- Soothes and stretches you from head to toe.
FULL BODY
- Full body massage experience.
UPPER BODY
- Focuses the massage on your upper body.
LOWER BODY
- Focuses the massage on your lower body.
DEMO
– For a narrated demo of the chair's features, select SETTINGS, then BLUETOOTH to
verify that the Bluetooth is turned on. The default demo narration volume is OFF; use the up/down
navigation buttons on the remote to control the demo narration volume.
2. Select the desired program. The Set Shoulder Height screen displays.
3. Set the shoulder height to the desired position, ranging from small (1) to large (9). Your massage
automatically maps to the selected shoulder height, for maximum effectiveness.
4. Sit back and enjoy a world-class massage!
NOTE: You can access the Set Shoulder Height screen during any massage by pressing one of the
Position buttons on the remote control.
9

Publicité

Table des Matières
loading

Table des Matières