Introduction
Introduction
This quick start guide is intended as a quick introduction into working with the printer and also
to enable inexperienced users to operate the device properly. It describes the most important
Ah ha!
functions of the printer and contains the essential information for your everyday work with the
printer. A more detailed description of the printer, its characteristic features, and further
information is contained in the User Guide on the Online CD-ROM, which is inserted at the
back of this manual.
➤
Important information is highlighted in this manual by two symbols.
Symbols used
CAUTION highlights information which must be observed in order to prevent injuries to the
STOP
user and damage to the printer.
NOTE highlights general or additional information about a specific topic.
➤
Read the following instructions thoroughly before starting up your printer in order to prevent
Important safety
injuries and avoid damage to the device.
instructions
Keep this Operator's Manual in a place which is easily accessible at all times.
Place the printer on a solid base so that it cannot fall down to the ground.
Do not expose the printer to high temperatures or direct sunlight.
Keep all liquids away from the printer.
Protect the printer from shock, impact and vibration.
Be sure to connect the printer to a socket with the correct mains voltage.
The power supply cable may be damaged if the paper edges constantly chafe the insulating
sheath. The user must always ensure that there is sufficient distance between the power
supply cable and the paper.
Never carry out maintenance or repair work yourself. Always contact a qualified service
STOP
technician.
Whenever you want to disconnect the printer from the power supply, pull the plug out from
STOP
the mains socket.
Additional safety instructions are provided at the relevant places in the text.
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
2
Quick start guide