Step 4 - Install Casters (Optional) - Haier HLP21N Guide De L'utilisateur

3. Using a Phillips screwdriver and the 6 bottom plate screws (provided), insert
each screw through the bottom plate and into the bottom of the washer.
Tighten the screws completely.

STEP 4 - INSTALL CASTERS (OPTIONAL)

1. Unscrew and remove the 4 fixed leveling legs.
2. Screw each of the 4 casters into the holes in the base of the washer. Using a
wrench, tighten the locking nut to the bottom of the washer.
3. Push the tab on each caster into the down position to lock the caster.
FRONT
FACE TO FLOOR
Bottom Panel Screw
Caster Wrench
Caster
11