Step 4 - Install Casters (Optional) - Haier HLP21N Guide De L'utilisateur

2. Align the holes in the bottom plate with the holes in the bottom of the washer.
IMPORTANT: To avoid damage to the washer, make sure the bottom plate is
positioned correctly before fastening the plate to the washer.
3. Using a Phillips screwdriver and the 6 bottom plate screws (provided), insert
each screw through the bottom plate and into the bottom of the washer cabinet.
Tighten the screws completely.

STEP 4 - INSTALL CASTERS (OPTIONAL)

1. Unscrew and remove the 4 fixed leveling legs.
2. Screw each of the 4 casters into the holes in the base of the washer. Using a
wrench, tighten the locking nut to the bottom of the washer.
3. Press the tab on each caster into the down position to lock the caster.
14
FRONT
FACE TO FLOOR
a
Bottom Panel Screw
a
Caster Wrench
b
Caster