Auto Recipe - GE PCK916-27 Manuel

Special features of your oven control.
OR
+
+
20
All manuals and user guides at all-guides.com
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the Off pad is pressed. This continuous
6-second beep may be canceled.
To cancel the 6-second beep:
Press the Bake and Broil Hi/Lo
pads at the same time for 3 seconds,
until the display shows SF.
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the Bake and Broil Hi/Lo pads
at the same time for 3 seconds, until
the display shows SF.
Press the Light On/Off pad. The
display will show 2 BEEP. This is
the middle volume level.
Press the Light On/Off pad again.
The display will show 3 BEEP.
This is the loudest volume level.

Auto Recipe

™ Conversion
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
Once the feature is activated, the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F (177°C) and press
the Start pad, the display will show CON and
the converted temperature of 325°F (163°C).
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
Press the Timer On/Off pad. The
display shows CON BEEP (continuous
beep). Press the Timer On/Off pad
again. The display shows BEEP.
(This cancels the one beep every
6 seconds.)
Press the Start pad.
Press the Light On/Off pad again.
The display will show 1 BEEP.
This is the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Press the Start pad to activate the
desired level shown.
(on some models)
™ To activate the feature:
Press the Bake and Broil Hi/Lo
pads at the same time for 3 seconds,
until the display shows SF.
Press the Convection Bake pad. The
display will show CON OFF. Press the
Convection Bake pad again. The
display will show CON ON.
Press the Start pad.
To deactivate the feature, repeat steps
1–3 above but press the Start pad when
CON OFF is in the display.