Pfannenberg DTS Serie Instructions D'utilisation page 99
Masquer les pouces
Voir aussi pour DTS Serie:
- Notice d'utilisation et de montage (52 pages) ,
- Manuel d'utilisation (456 pages) ,
- Instructions d'utilisation (444 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENG
4.5.2
DTS cooling unit assembly (side attachment)
4.5.2.1
Making cut-outs for DTS cooling unit
Assembly holes
Fig. 10: External view of switch cabinet, assembly bores and cut-outs
1
Holes
2
Device contour
Requirements
DANGER – Danger to life due to electric shock. Make sure that the unit is voltage-free.
•
All general requirements are satisfied, see "General", Page 30.
Required tools and materials
•
Saw
•
Switch cabinet milling machine if necessary
•
Protective covers
Procedure
1.
Ensure that the switch cabinet has a protective cover to protect against chips.
2.
Make cut-outs and assembly holes as shown in Fig. 10.
3.
Deburr the cutting edges.
4.
Remove chips and assembly waste from the switch cabinet.
The cut-outs and holes are made and the cooling unit can be assembled.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 400 V, 2~ | 086100115
Assembly cut-outs
3
Assembly cut-outs
G00007
31/68
Publicité
Table des Matières
