Pfannenberg DTS Serie Instructions D'utilisation page 95
Masquer les pouces
Voir aussi pour DTS Serie:
- Notice d'utilisation et de montage (52 pages) ,
- Manuel d'utilisation (456 pages) ,
- Instructions d'utilisation (444 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENG
4.2.1
Transporting the cooling unit
Prerequisites
The cooling unit is accommodated in the factory packaging.
Required tools and materials
Lashing straps, if necessary loading crane
Procedure
1.
Secure the unit properly for transport using lashing straps. Always transport in the operating position.
2.
Only lift the unit by its housing.
3.
Always raise the cooling unit slowly and evenly and park it securely.
The cooling unit was properly transported and loaded.
NOTE
The cooling unit can also be lifted by means of M8 jack rings.
Observe the information in chapter "Crane transport", Page 28 for crane transport.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 400 V, 2~ | 086100115
27/68
Publicité
Table des Matières
