Specifications; General Specifications - Chauvin Arnoux C.A 6630 Notice De Fonctionnement

Battery Tester C.A 6630
3.1

GENERAL SPECIFICATIONS

•
Resistance measurement by the 4-wire AC method.
•
LCD screen with two display units, information and/or warning symbols
and result rating LEDs.
•
The instrument switches off automatically after 30 minutes without using
keys.
•
Zero adjustment function: compensation of circuit, voltage displayed 0 V.
•
Comparator function: the parameters of 99 comparators can be set and
recorded in the instrument (high and low resistance limits and adjustment
of voltage threshold point).
•
Upon comparison of the measured result with the selected comparator,
the rating LEDs light up, and are accompanied where appropriate by a
warning beep.
•
Possibility of storing measurement results: 999 locations for manual
storage and 9600 locations for the automatic storage of samples in data
logger mode.
•
Short-circuit voltage on terminals: 3.5Vpp max.
•
Operating conditions: 0 ° C to +40 ° C with 80% relat ive humidity (RH) (no
condensation)
•
Storage conditions: -10 ° C to +50° C with 80% relati ve humidity (RH) (no
condensation)
•
Power supply to the instrument / battery: 6 x 1.5V batteries (AA type)
•
Maximum demand: 1.0VA
•
Operating battery life: 7 hours (approx.).
•
Maximum operating altitude: 2000m.
•
Dimensions : 250mm x 100mm x 45mm
•
Weight: 500g (approx.) (batteries included)

3 SPECIFICATIONS

28
www.electronicaembajadores.com
English