Installing the appliance
1.
Remove the transpor tation
safety component
2.
Fit cover profile.
3.
Slide the appliance into the recess
and adjust the depth depending on the
desired appearance.
Route the mains cable towards the
socket.
When sliding in the appliance, make
sure that the mains cable is not dam-
aged.
40
On appliances with
hinges on the right
On appliances with
hinges on the left
5.
• Undo the screws
.
1
• Slide bracket towards the unit wall.
• Tighten the screws
.
1
• Screw in the screws
(4 x 17).
2
4.
Secure the appliance through the
hinges using two 4 x 17 screws
per hinge.