Bestop Trektop Instructions D'installation page 20

Attach Main Pivot Brackets To Vehicle
Section 12
Tools
5mm
T50
Allen Wrench
Torx Driver
Step 1
Remove
Remove the bolt shown in the illustration.
P20 - 56872 Rev. J 1121
Parts
Main Pivot Bracket Right
Part #602.60
Qty 1
Main Pivot Bracket Left
Part #602.61
Qty 1
Spacer, 5.5MM
Part #603.20
Qty. 2
Screw,M8 X 1.25 X 30mm
Part #583.63
Qty. 2
5mm Hex Socket
Installation Instructions - Trektop for Bronco 2 Door
Step 2
Install the Main Pivot Bracket Right (Part # 602.60)
Using the bolt that was removed in Step 1, A 5.5mm
Spacer (Part # 603.20) and one (1) M8 x 30mm Screw
(Part # 583.63).
Repeat this step on the left side of the vehicle.
Page 20
© 2021 Bestop, Inc.