Bestop Trektop Instructions D'installation page 30

Section 22 Install Rear Halo
Tools
T30
Torx Driver
SCREW, M6 X 1.0 X 15mm
Part #533.61
Qty. 4
T-30 Torx
Fold the front of the top (Header) back.
P30 - 56872 Rev. J 1121
Parts
Installation Instructions - Trektop for Bronco 2 Door
Fabric not Shown
Attach The Rear Halo to the Rear Halo Mounting
Bracket using two (2) of the M6 x 15mm screws
(Part # 533.61) per side.
Repeat this step on the left side of the vehicle.
Page 30
Fabric not Shown
© 2021 Bestop, Inc.