Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Install Top and Bow Assembly
Section 20
Tools
T30
Torx Driver
Have someone help you lift the top assembly on top of the
vehicle with the side bows going towards the rear of the
vehicle. Attach the Side Bow to the Main Pivot Brackets using
one (1) Pivot Knuckle Screw (Part #308.65).
Repeat this step on the left side of the vehicle.
P28 - 56872 Rev. J 1121
Tip
It will be easier lifting the fabric assembly
onto the vehicle with two people.
Installation Instructions - Trektop for Bronco 2 Door
SCREW, Pivot Knuckle
Part #308.65
Qty. 2
T-30 Torx
Tip
Remove antenna to make access to the
right side of the vehicle easier.
Page 28
Parts
© 2021 Bestop, Inc.
Publicité
Table des Matières
