Bestop Trektop Instructions D'installation page 19

Attach Door Rails
Section 11
Step 1
Remove
Remove the bolts from the vehicle (two from each
side) and hold onto it. These bolts will be reused
later in the installation.
Note:
Remember the place where the fasteners
were removed from.
P19 - 56872 Rev. J 1121
Tools
T50
Torx Driver
Parts
Front Door Rail Left Front Door Rail Right
Part #599.17 Part #599.16
Qty. 1 Qty. 1
Spacer, 5.5MM
Part #603.20
Qty 2
Installation Instructions - Trektop for Bronco 2 Door
Step 2
Attach Front Door Rails to the vehicle using the bolts
that were removed from section 2 and one (1) 5.5
mm spacers (Part # 603.20).
Repeat this step on the left side of the vehicle.
Page 19
© 2021 Bestop, Inc.