SIGMA SPORT Topline BC 2209 MHR sTs Mode D'emploi page 37

6 tHE BASIC SEttINGS
6.3 SEttING tHE AIR PRESSURE to SEA LEVEL (SEA LEVEL)
2209
1
n n
You can find explanations about this function in Chapter "8 MEASURING THE ALTITUDE"
k Change the display to SEA LEVEL using the MODE 1 button.
1
k Press the SET button briefly. Display flashes.
2
k Set the value using the MODE 2 button (+) or the RESET button (-).
3
k Confirm by pressing the SET button. SET OK appears on the display.
4
6.4 SEttING ACtUAL ALtItUDE
-
2209
1
n
You can find explanations about this function in Chapter "8 MEASURING THE ALTITUDE".
k Change the display to ACT. ALTI. using the MODE 1 button
1
k Press the SET button briefly. The first settings number is flashing.
k Set the value using the MODE 2 button (+) or the RESET button (-).
2
k Move to the next figure using the MODE 1 button.
3
k Set the value using the MODE 2 button (+) or the RESET button (-).
4
k Confirm by pressing the SET button. SET OK appears on the display.
5
- +
2209 2209
2 3
+
2209 2209
2 3
n
2209
4
n
- +
2209
4
n
BC 2209 MHR
2209
5
37