Inserting The Cartridge - Braun FreeGlider 6680 Mode D'emploi

a b
c d
e
min
start
8

Inserting the cartridge

a) Disconnect the power supply cord from the shaver.
b) Open latch and pull away cover.
c) If necessary, remove old cartridge by its pull-out tag.
d) Remove sealing foil from new cartridge.
e) Insert cartridge as shown, push firmly.
f) Put cover in place and close latch.
• Only use original Braun cartridges.
• Depending on scale setting and your personal shaving
habits, one cartridge will last for approximately
15 shaves.
• Do not attempt to refill cartridges.
• The cartridge can be removed and reinserted later.
In that case a small loss of Shaving Conditioner might
occur. While traveling, do not take an unsealed cartridge
along nor leave one in the shaver.
f
Shaving
GlideControl allows you to choose the amount of
max
Shaving Conditioner you want to apply («min-max»):
When you raise the distancing bar (moving the scale to
«min»), the applicator will have less contact with your
skin and will apply less Shaving Conditioner.
If you move the scale to «max», more Conditioner will be
applied.
Please be aware that, in order to optimally pre-condition
your skin, during the first seconds somewhat more
Conditioner will be applied.
Before shaving you should not use moisturizing creme or
lotions, as they might impair the effectiveness of the
applicator. After shaving, there is no restriction on the
use of After Shave or Eau de Toilette.
Turning on the shaver («start»):
The pivoting cutting system automatically adjusts to
every contour of your face.